Not exactly what I would call a "fun" process. I would much prefer playing the original.
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| top replacement http://www-.luthiersforum.com/forum/viewtopic.php?f=10130&t=34255 |
Page 1 of 1 |
| Author: | nickton [ Tue Nov 15, 2011 5:06 pm ] |
| Post subject: | top replacement |
A few months ago I finished this 12 fret Brazilian Rosewood guitar and had it sitting on my bench when some stored wood and a telecaster blank fell on it from a shelf above. I posted pics and someone suggested documenting the repair of it, so here it is: Hopefully I've learned my lesson about shop clutter. |
|
| Author: | Chris Pile [ Tue Nov 15, 2011 5:07 pm ] |
| Post subject: | Re: top replacement |
That thing's had a tough life. Have fun with it! |
|
| Author: | nickton [ Tue Nov 15, 2011 5:11 pm ] |
| Post subject: | Re: top replacement |
Here's some more: More later. (it's almost done now.) removing the snakewood binding was a real ordeal, and an accomplishment I was unsure of being able to do. |
|
| Author: | nickton [ Wed Nov 16, 2011 1:11 pm ] |
| Post subject: | Re: top replacement |
Not exactly what I would call a "fun" process. I would much prefer playing the original.
|
|
| Author: | nickton [ Wed Nov 23, 2011 11:41 pm ] |
| Post subject: | Re: top replacement |
Looks like I unwittingly loaded those photos in reverse order. That neck was really well set I must say. Murphy's law: the neck you set perfectly will be the one you must remove because something will happen to break the top... My re set neck was at a bit too much of an angel, making a hump I had to sand down after removing a few more frets. I think it's almost there. I flooded certain areas with CA glue to take care of some wrinkles, and had to re-do an abalone inlay. Persistence pays off.  
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|